For below-grade waterproofing needs, Tremco offers a series of cold and bentonite sheet waterproofing membranes for vertical, horizontal and lagging applications.
- Cementitious Waterproofing Membranes
TREMproof FCW - TREMproof FCW is a 2 component, flexible cementitious waterproofing membrane system. It consists of special polymer pre-blended resin and fillers powder with graded fine quartz. TREMproof FCW is water based, non-toxic and non-hazardous.
- Cold Fluid-Applied Waterproofiing Membranes
Fluid-applied, modified polyurethane waterproofing membranes for vertical and horizontal applications.
TREMproof 201/60 - TREMproof® 201/60 is a high-solids, VOC-compliant, modified polyurethane waterproofing membrane.
TREMproof 250GC - TREMproof® 250GC is a rapid-curing, high-solids, VOC-compliant modified polyurethane waterproofing membrane.
TREMproof 260 - TREMproof® 260 Spray-Applied Waterproofing Membrane is a polymer-enhanced, single-component, fluid-applied asphalt
emulsion below-grade waterproofing membrane.
TREMproof 60 - TREMproof® 60 is a one component bitumen modified, moisture curing polyurethane membrane for non-exposed waterproofing. Available in Greater China only.
- Hot Fluid-Applied Waterproofing Membranes
PQ6170 - PQ-6170 is a blend of synthetic polymers in specially selected compatible asphalt.
- Preformed/Sheet-Applied Waterproofing Membranes
Bentonite sheet waterproofing membranes with expandable bentonite adhered to high density polyethylene (HDPE) for horizontal, vertical and lagging applications.
Deckseal - Deckseal is a sheet waterproofing membrane consisting of 20 mils of transparent HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/sq ft, creating a dual waterproofing system.
Paraseal - Paraseal® is a sheet waterproofing membrane consisting of 15 mils of HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/sq ft, creating a dual waterproofing system.
Paraseal GM - Paraseal® GM is a sheet waterproofing and gas-mitigating membrane consisting of 20 mils of HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/sq ft, creating a dual waterproofing system.
Paraseal GM/LG 20 Mil - Paraseal GM/LG – 20 mil is a sheet waterproofing and gasmitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun polypropylene. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT Tape and Parastick ‘n’ Dry Tape installation.
Paraseal GM/LG 60 Mil - Paraseal GM/LG – 60 mil is a sheet waterproofing and gasmitigating membrane consisting of 60 mils of HDPE, expandable granular bentonite and a protective layer of spun polypropylene. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for extruded weld or wedge weld installation.
Paraseal LG - Paraseal® LG is a sheet waterproofing membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun polypropylene. The composite weight of the material is up to 1.0 lb/sq ft, creating a dual waterproofing membrane.
TREMply - Tremply is a heavy duty, 180 g/m2 high strength, non-woven polyester mat impregnated and coated with a tough APP modified bitumen compound. Available in Greater China only.
TREMproof 1400 SR - Tremproof 1400 SR is a heavy duty, 180 g/m2 high strength, non-woven polyester mat impregnated and coated with a tough APP modified bitumen compound. Available in Greater China only.
TREMproof 3000 - TREMproof® 3000 is an APP modified bituminous torch applied waterproofing membrane.
TREMproof 3300 - TREMproof® 3300 is a self adhering, cold applied sheet waterproofing membrane.
TREMproof 4000 - TREMproof® 4000 is an APP modified bituminous torch applied waterproofing membrane.
TREMproof 4000IM - Tremproof 4000IM is a membrane consisting of a non-woven polyester inlay and a specially composed APP-modified bitumen.
TREMproof 4000M - TREMproof® 4000M is an APP modified bituminous torch applied waterproofing membrane with mineralised surface.
- Slurry Coat Crystalline Waterproofing
PQ200 - Permaquik 200 Crystalline Waterproofing is a capillary waterproofing formulation of proprietary blends of chemicals, quartz sand and cement.
A multi-composite waterstop with the self-sealing ability of bentonite used to seal cold joints in concrete.
Superstop - Superstop is a composite waterstop containing expandable, granular bentonite.
The TREMDrain Series consists of prefabricated drainage mats for vertical and horizontal applications with a variety of combinations of filter fabrics, drainage cores and protective polymeric film and a Total-Drain System to replace perforated pipe/aggregate collection systems.
TREMdrain - TREMDrain® is a two-layer drainage mat consisting of a polystyrene core and spun-bound polypropylene fabric.
TREMdrain 10/12G - TREMdrain 10/12G is a combination of filter fabrics and drainage core.
TREMdrain 10/8G - Tremdrain 10/8G is a combination of filter fabrics and drainage core.
TREMdrain 1000 - TREMDrain® 1000 consists of a polystyrene core and spun-bound polypropylene fabric (PF).
TREMdrain 2000 - TREMDrain® 2000 is a three-layer drainage mat including a woven polypropylene fabric, polystyrene core and polymeric film.
TREMdrain 3000 - TREMDrain® 3000 is a two-part prefabricated drainage material and protection board consisting of a formed polystyrene core covered on one side with a woven polypropylene filter fabric.
TREMdrain 6000 - TREMDrain 6000 is a multi composite, prefabricated drainage material and protection board consisting of a formed polypropylene core covered on one side with a high strength, spun bound polypropylene filter fabric.
TREMdrain 6600 - TREMDrain® 6600 is a multi-composite prefabricated drainage material and protection board consisting of a formed polypropylene core covered on one side with a high strength, non-woven needle-punched polypropylene filter fabric that is heat bonded to the core.
TREMdrain DPI - TREMDrain® DPI is an optional drainage, protection and insulation board designed for use primarily with TREMproof® 260 Spray-Applied Waterproofing Membrane. TREMDrain DPI’s unique and proven glass fiber design promotes efficient water drainage and the retention of the board’s R-value while the semi-rigid nature of the board acts as a protection course.
TREMdrain GS - TREMDrain® GS drainage mats consist of a perforated polystyrene core with fabrics attached to both sides. Installed with the dimples down, the core also functions as a water retention layer.
TREMdrain QSP - TREMDrain® QSP is a three-part prefabricated drainage panel and protection board consisting of a formed, perforated polystyrene core covered on the dimple side with a non-woven, needle-punched polypropylene filter fabric along with a breathable cross-hatched fabric on the backside.
TREMdrain S - TREMDrain® S, consisting of a spun-bound polypropylene fabric, polystyrene core and polymeric film backing, has the highest compressive strength within the TREMDrain Series.
TREMdrain Total Drain - TREMDrain® Total Drain is a two-layer drainage mat with a unique polystyrene core that consists of a high-profile drainage section for water collection and flow around the structure and a transition section to connect to other TREMDrain Series drainage mats.
- Protection Courses
Protection Courses designed to absorb the impact of aggregate shock, normal jobsite foot traffic and to protect the membrane waterproofing from penetration by sharp aggregate during backfilling, slab pouring and later settlement.
Elastomeric Sheeting - Elastomeric Sheeting is classified as a thermoset material made of highest quality uncured neoprene rubber at a thickness of 60 mils (1.52mm).
HDPE Protection/Barrier Course - HDPE Protection/Barrier Courses are a series of high-density polyethylene (HDPE) sheets designed for both membrane protection as well as various barrier applications.
Powerply - Powerply is a smooth surfaced modified bitumen protection sheet for waterproofing membrane against abrasion, impact and puncture, during backfilling or application of a structural concrete wearing course.
POWERply Standard Smooth - POWERply® Standard Smooth is a smooth-surfaced, modified bitumen membrane applied as an extremely heavy-duty protection course over TREMproof® 6100.
POWERply Standard White Granular - POWERply® Standard White Granular is a rough-surfaced, modified bitumen sheet used in conjunction with waterproofing membranes as an extremely heavy-duty protection course, primarily in horizontal applications.
Tremco 2011 - Tremco 2011 is an open-weave fabric consisting of glass fiber yarn saturated with synthetic resins.
Tremco 2178 - Tremco 2178 Glass Ply Sheet is an asphalt-impregnated fiberglass ply felt marked with laying lines and lightly dusted on one side with a fine mineral parting agent.
Tremco 2190 - Tremco 2190 consists of a single ply of felt fully saturated and coated on both sides with premium asphalt and containing durable, interlocking cellulose fibers.
Tremco 2450 - Tremco® 2450 Protection Board is an extruded, hollow-core polypropylene/polyethylene copolymer used to provide protection for most commonly used waterproofing or roofing membranes, both during and after construction.
Tremco 2550/2560 - Tremco® 2550/2560 Protection Board is a semi-flexible asphaltic sheet with a core made from a blend of asphalt, plasticizer and inert fillers sandwiched between two skins of an asphalt-saturated fiberglass.
Tremco Protection Mat - Tremco Protection Mat is an ultra lightweight, extremely tough 14 oz. protection mat for waterproofing membranes in both vertical and horizontal applications.
Tremco Retention Squares - Tremco Retention Squares are high-density polyethylene reservoir boards designed for use in GreenScape and amenity deck applications.
- Associated Products
Bitumen Membrane Primer - Bitumen Membrane Primer is a thin black bitumen priming solution designed to penetrate and seal porous surfaces to provide and prepare a base for waterproofing protective systems.
Para JT - Para JT is an adhesive joint tape compound formulated with cross-linked polymeric elastomers.
Para Stick 'n' Dry - Parastick 'n' Dry® is a laminate of bentonite applied to mesh with a pressure-sensitive adhesive on one side. Parastick ‘n’ Dry is used in conjunction with waterstops, waterproofing membranes, Paraseal® and Paramastic to assist in waterproofing difficult areas.
Paragranular - Paragranular is a premium, Wyoming type, high swelling, granular sodium bentonite. When in the presence of water, Paragranular reacts and forms an impervious waterproof gel.
Paramastic - Paramastic is an expandable mastic for use with Paraseal® waterproofing membrane.
Paraprimer - Paraprimer® is an adhesive primer formulated to prepare construction surfaces prior to application of Parastick ‘n’ Dry®, Superstop and various tapes. Construction surfaces other than HDPE liner are always primed with Paraprimer prior to taping.
Paraterm Bar - Paraseal® Paraterm Bar is an aluminum alloy specially formulated to exhibit excellent holding power. When fastened through pre-cut holes, Paraterm Bar provides tight, straight and extremely long-lived terminations, caulk troughs and drip edges.
Tremco Epoxy Primer - Tremco Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade waterproofing membranes, Vulkem® urethane coatings and ExoAir® air barrier membranes.
TREMprime HR Primer - TREMprime® HR is a solvent-based modified bituminous primer for use in preparing porous and non-porous surfaces for application of Tremco hot-applied asphaltic fluids.
TREMprime QD Low-Odor Primer - TREMprime® QD Low-Odor Primer is a quick drying, high-solids, solvent-based modified bituminous roofing primer used with Trempro 6100 waterproofing membrane.
TREMprime WB Primer - TREMprime® WB Primer is a high-solids, water-based primer for use in preparing porous and non-porous surfaces for application of TREMproof 6100, 6100BM and 6145.
Vulkem Primer 191 QD - Vulkem® Primer #191 QD is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat.
- Traffic Coatings
- Pedestrian Coatings
Attractive composite waterproofing systems composed of tough-curing liquid polyurethane rubber that cure to form durable, easy-to-clean seamless membrane systems.
Vulkem 171/350NF/351. - Vulkem 171/350NF/351 is an attractive composite waterproofing system comprised of tough-curing liquid polyurethane with with primer coat.
Vulkem 360NF/351NF - Vulkem® 350NF/351 is an attractive composite waterproofing system composed of tough-curing liquid polyurethane.
Vulkem 801 - Vulkem® 801 is a liquid-applied, one-part polyurethane coating system that has been formulated to have a high tensile strength, tear strength and elongation all in a viscosity grade that can be used horizontally and vertically.
Vulkem OC810 Coating - The Vulkem® OC810 Coating is a high-solids, aliphatic urethane membrane developed to be applied in one 35-40 mils coat for aesthetically pleasing, durable waterproofing protection. It is low odor, low VOC (less than 30g/L), mildew- and fungus-resistant and designed for use with Tremco Rubber Aggregate 12-20 mesh for soft texture and skid-resistance.
- Vehicular Coatings
Traffic Deck Coating Systems designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the Systems will protect the concrete from damaging effects of water, deicing salts, chemicals, gasoline, oils, and antifreeze.
Vulkem 171/350NF/345/346 - Vulkem® 350NF/345/346 is a modified polyurethane Traffic Deck Coating System composed of a primer coat, base coat (350NF), heavy duty intermediate coat (345) and a top coat (346).
Vulkem 350 NF (R,SL)/345/346 System - Vulkem® 350NF/345/346 is a modified polyurethane Traffic Deck Coating System composed of a basecoat (350NF), heavy-duty intermediate coat (345) and a topcoat (346).
Vulkem 350NF/346/346 - Vulkem® 350NF/346/346 is a modified polyurethane traffic deck coating system composed of a base coat (350NF), heavy duty intermediate coat (346) and top coat (346). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance, along with remarkable chemical stability. The elastomeric properties of the system’s components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks.
- Fast Cure Coatings
Vulkem 350NF/950NF/951NF - Vulkem® 350NF/950NF/950NF is a modified polyurethane traffic deck coating system composed of a base coat (350NF), heavy duty intermediate coat (950NF) and a top coat (951NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability.
Vulkem 360NF/950NF/951NF - Vulkem® 950NF and Vulkem 951NF topcoats are high-performance, neighbor-friendly, two-part polyurethane coatings for vehicular (heavy duty) and pedestrian (medium duty) application where low odor and extremely durable coatings are desired.
Vulkem® EWS with PUMA Technology - Vulkem® EWS with PUMA technology is designed to have tenacious adhesion and extreme abrasion resistance. It can be walked on in one hour, which will minimize operation disruption.
- Speciality Coatings and Associated Products
Alumanation 301 - This premium grade industrial maintenance coating is formulated from specially processed asphaltic liquids, non-dryng oils, a proprietary blend of natural and synthetic fibers, and aluminium pigment. Single coat application, protects against rust and has a reflective finish.
Polyfoil - POLYFOIL is a 2 mil finish aluminum foil tape laminated to a 33 mil gray elastomeric modified butyl rubber adhesive.
Vulkem 171/350/352 - Vulkem 171/350NF/352 is an attractive composite waterproofing system comprised of tough-curing liquid polyurethane with acrylic liquid coating finishing.